Device Overview
VertX is comprised of several units, that once combined form a single device.
Connecting The Cameras
It is likely your cameras will be a separate unit to the core VertX unit.
Powering On The Device
To power on the device:
Installing Camera Filters
During commissioning you will have been provided with a variety of NIR filters.
Connecting To The Internet
Ethernet
Accessing The Dashboard
The dashboard is very simple to access, and there are two ways of accessing it.
Setting Focus Levels
There are two ways to adjust the focus levels of your device depending on the configuration. Manually, or via the dashboard.
Image Correction
Image correction describes the process of using a checkerboard-based calibration plate to
Device Settings
The device settings page (found by navigating to the Settings page via the top navbar)
Firmware Upgrades
Most of the time, the Instruct3D team should be able to perform a remote firmware upgrade via the internet.